NEWS

Home page

Clothing quality discrimination

To check the quality of clothing, you should first measure the length, chest circumference, collar and sleeve length, shoulder width, as well as pants length, hip circumference, and waist circumference according to the model marked on the clothing, to see if the size specifications are accurate. The error should generally be less than 1.5%. After verifying the specifications, the key is to verify the internal quality of the clothing. The method is visual inspection, ruler measurement, and strict verification. Perform a visual inspection before trying it on.

(1) Top: Check from the front, back, and side. Before, observe if the two sharp corners of the collar are symmetrical; There should be no height or skewness, it should be straight and straight, the collar should fit the neck, and the collar should not be exposed; The position of the pockets is symmetrical, the shoulder blades are wide and comfortable, the back fork is flat, and the side mainly depends on whether the shoulder seam is straight, whether the clothes and sleeves are round and even, and there should be no unevenness or dents. Check whether the sleeves are consistent in front and back, and whether the hem is straight and smooth.

(2) Pants: can be inspected in three steps: flat, upper, and three-dimensional. Plane inspection, select to align and flatten the seam, check if the seam is straight and does not crack, whether the side seam is flat, whether the pocket cushion is not exposed, whether the pants legs are snug and of the same size, and do not hang the pocket. Pull up one more leg of the pants to see if the lower seam is aligned, straight, and does not lift, whether the intersection with the back seam is straight, whether the lower seam of the pants is aligned, straight, and does not lift, whether the intersection with the back seam is straight, and whether the lower seam of the pants is lifted. Check the upper part, mainly to see if the waist is straight, not fat or tight, whether the pleats and seams are symmetrical, whether the back pocket is snug and flat, whether the small front of the garment is flat, the position is accurate, and whether the front and inner front fit properly and smoothly; Whether the zipper is flexible; When conducting a stereoscopic examination, lift the waist of the pants according to the shape you are wearing, check whether the front and back seams are round and smooth, the four grid seams are straight, and whether the pants and seams are flat and not cracked.